Quick Connect Hydrant and Tees for Portable Troughs

The Kiwitech Tee is a uniquely versatile speed-coupling for polypipe. Under pressure the bare end of standard 25mm O.D. polypipe can be push-fitted and disconnected (using a bayonet action) into any of the Tee legs (no unscrewing of the fitting, no tools, no threading).
What makes the Kiwitech Tee truly special is a valve that fits inside any chosen Tee leg that is activated by pushing in polypipe. Inclusion of the valve turns the fitting into a very fast ('quick-connect'), inexpensive and very high flow Hydrant. Hydrants are natural companions of Kiwitech Troughs.

Note: Hydrants are not for use with direct mains water supplies. Due to potential risk of backflow there must be an air-gap in the system i.e. ball valve in header tank. For further information please contact us or consult your local water authority.


This div is required to make the 'x ADDED" flash that occurs after an item is added to the cart VIA AJAX

Hydrants and Tees

Use Tees with MDPE or LDPE no greater than 25.4mm O.D. and minimum pressure rating of 8 Bar. For larger feeding lines use Plasson adapters screwed onto the Tee Body which has 1 ¼’’ BSP threads and a 30mm bore (Tee Bodies cope with flows typical of 40mm O.D. poly).

Hydrant Tees

The key function of the hydrant is to provide quick couple water source points for portable troughs, which usually have a 25mm O.D. polypipe lead about 8 metres long.
In frost prone areas use a ‘Cone Plug’ (scroll to page end) with End Of Line Hydrants. Before periods of severe frost we recommend disconnecting the water lateral and draining 50% of the water to avoid line damage.

  • Tee Hydrant 25mm (both ends open)
    Tee Hydrant 25mm (both ends open) - large image

    WF THY25

    Tee Hydrant 25mm (both ends open)

    £15.92 (excl VAT)
    £19.10 (incl VAT) 

  • Tee Hydrant End of Line 25mm
    Tee Hydrant End of Line 25mm - large image

    WF THYEND25

    Tee Hydrant End of Line 25mm

    £14.77 (excl VAT)
    £17.72 (incl VAT) 

Trough Tees

Designed for use with Kiwitech Troughs - see Fixed and Portable Troughs page.
In frost prone areas use a ‘Cone Plug’(scroll to page end) with End Of Line Trough Tees.

  • Tee Trough 25mm (both ends open)
    Tee Trough 25mm (both ends open) - large image

    WF TTR25

    Tee Trough 25mm (both ends open)

    £7.60 (excl VAT)
    £9.12 (incl VAT) 

  • Tee Trough End of Line 25mm
    Tee Trough End of Line 25mm - large image

    WF TTREND25

    Tee Trough End of Line 25mm

    £6.45 (excl VAT)
    £7.74 (incl VAT) 


Hydrant and Tee Parts

Fitting Parts

  • W.Fitting Cone Blank 25mm
    W.Fitting Cone Blank 25mm - large image

    WF CONEBL25

    W.Fitting Cone Blank 25mm

    £1.66 (excl VAT)
    £1.99 (incl VAT) 

  • W.Fitting Cone Plug 25mm
    W.Fitting Cone Plug 25mm - large image

    WF CONEPLG25

    W.Fitting Cone Plug 25mm

    £1.39 (excl VAT)
    £1.67 (incl VAT) 

  • W.Fitting Cone 25mm
    W.Fitting Cone 25mm - large image

    WF CONE25

    W.Fitting Cone 25mm

    £1.74 (excl VAT)
    £2.09 (incl VAT) 

  • W.Fitting Collet 25mm
    W.Fitting Collet 25mm - large image

    WF COL25

    W.Fitting Collet 25mm

    £0.58 (excl VAT)
    £0.70 (incl VAT) 

  • W.Fitting O-Ring 25mm
    W.Fitting O-Ring 25mm - large image

    WF ORNG25

    W.Fitting O-Ring 25mm

    £0.67 (excl VAT)
    £0.80 (incl VAT) 

  • W.Fitting Body 25mm
    W.Fitting Body 25mm - large image

    WF BOD25

    W.Fitting Body 25mm

    £2.78 (excl VAT)
    £3.34 (incl VAT) 

 - large image

Valve

  • WV VAL25

    Valve 25mm

    £6.59 (excl VAT)
    £7.91 (incl VAT) 

  • Valve Keeper 25mm
    Valve Keeper 25mm - large image

    WV KEPR25

    Valve Keeper 25mm

    £0.48 (excl VAT)
    £0.58 (incl VAT) 

  • Valve Spring 25mm
    Valve Spring 25mm - large image

    WV SPR25

    Valve Spring 25mm

    £1.74 (excl VAT)
    £2.09 (incl VAT) 

  • Valve Plunger 25mm
    Valve Plunger 25mm - large image

    WV PLNG25

    Valve Plunger 25mm

    £2.45 (excl VAT)
    £2.94 (incl VAT) 

  • Valve Body 25mm
    Valve Body 25mm - large image

    WV BOD25

    Valve Body 25mm

    £1.92 (excl VAT)
    £2.30 (incl VAT)